Dimensions: 3/4 inch x 60ft x 0.007 inch
The tape shall be applied in half-lapped layers with sufficient tension to conform and produce a uniform covering. In most applications, this tension will reduce the tape’s width to approximately 5/8 of its original width. On pigtail splices, the tape should be wrapped beyond the edge of the wires then folded back, leaving a protective cushion to resist cut-through. Apply the tape with no tension on the last wrap to prevent flagging.
Standard Rolls are 18mm Wide x 20 Meters Long
3M Temflex 1610 Tape has an overall thickness of 0.15mm and offers excellent resistance to abrasion, moisture, alkalis, acid and sunlight.
This highly conformable tape is very easy to apply and has high wet dielectric strength and provides excellent mechanical protection of wrapped components with minimum bulk.
3M Temflex 1610 is designed for use in phase identification, colour coding of motor leads and piping systems and for the marking out of safety areas. It is also used as a protective jacketing for high voltage cable splices and the harnessing of wires and cables. It is used both indoors an outdoors.